https://docs.microfocus.com/itom/Data_Protector:10.04/Use/cli_reference/1m/omnisetup.sh


netsh advfirewall firewall add rule name="dp_CMclient" dir=in action=allow protocol=TCP localport=5555,5565



import command

omnicc -import_host dptestwin64
omnicc -import_host dptestlinux

omnicc -import_is dptestis.hkvegetable.com



adduser command
https://docs.microfocus.com/itom/Data_Protector:2018.09/Use/cli_reference/1/omniusers
https://docs.microfocus.com/itom/Data_Protector:10.04/Admin/Users/CH_Users
https://docs.microfocus.com/itom/Data_Protector:10.04/Use/cli_reference/1m/omnisetup.sh

omniusers -list

omniusers -add -type {U | W} -usergroup DPtestcm -name UserName -group GroupOrDomainName -client ClientName [-desc Description]
omniusers -add -type {U | W} -usergroup DPUserGroup -name UserName -group GroupOrDomainName -client ClientName [-desc Description]

omniusers -add -type W -usergroup admin -name administrator -group \* -client dptestwin64

omnisv -restart

omnicc -secure_comm -configure_peer dptestcm.hkvegetable.com
omnicc -secure_comm -configure_peer dptestis.hkvegetable.com
omnicc -secure_comm -configure_peer dptestlinux.hkvegetable.com
/opt/omni/bin/omnicc -secure_comm -configure_peer dptestcm.hkvegetable.com

HPUX components:
./omnisetup.sh -install da,autodr,ma,oracle8,cc

/opt/omni/lbin # ./devbra -dev

yum install xinetd
yum install bc
./omnisetup.sh -install da,autodr,docs

./omnisetup.sh -install da,autodr,ma,


iptables -A INPUT -p tcp -m tcp --dport 5565 -j ACCEPT
iptables -A INPUT -p tcp -m tcp --dport 5555 -j ACCEPT

https://docs.microfocus.com/itom/Data_Protector:10.03/Install/client/c03-s05install_Linux_clients#CIHBHHEF

# firewall-cmd --add-port 5555/tcp --permanent
# firewall-cmd --reload

linux

==add user to list
/etc/opt/omni/server/users/UserList

  Client was not imported into the cell.
  Please, perform the import manually by following the steps below.
    step1: Configure the cell manager by running /opt/omni/bin/omnicc -secure_comm -configure_peer <Cell Server> from this host.
    step2: Perform the import manually from cell manager or from one of the other clients of the cell.